
How to use?
- Touch the metal ring at the bottom of the moon lamp to turn on / off the light and change color from white to yellow.
- Long press the metal ring to adjust the brightness, and it has the brightness memory function.
- If your hand is too dry or the temperature is too low, the light may not respond.
- The white light will not shine when power is low.
- Insert the DC connector into the metal ring at the bottom of the moon lamp to charge, the red light is always on during the charging.
- The red light will automatically turn off when fully charged.
Notice:
- When charging,the ball becomes red,full,and then extinguished;
- Because the installation of the circuit required,the sphere edge will have seam(as shown)
- 3D priting forming principle causes the object surface to have the contour line phenomenon.
- This product does not have waterproof ability,not strong acid,alkali.
- This product can not be strongly hit or fall from high places.
Specification:
Materials:PLA plastic
Specifications:please refer to thr diameter of the product
Brightness: Stepless Adjustment
Color temperature: 3000K / 6000K
Battery capacity:400MHA
Charging time: 6 - 8 hours
Working time: 3-8hours ( depends on brightness )
Charging mode:USB DC5V
Charging current:1A
Using environmrnt:0-40<75%
Package:
1 Moon light1 Charging line
1 Product description
1 Wood frame